Example product . Product 2.
		Metal Working : Machining with carbide can be difficult, as carbide is more brittle than other tool materials, making it susceptible to chipping and breaking
		Plastic Crusher Cutter (HSS) Able to machine workplaces at very high speeds but are brittle and expensive for normal lathe work. High-speed steel tool bits are available in many shapes and sizes to accommodate any lathe operation in process.
		Tungsten Carbide :Tungsten carbideis the hardest man-made metal. It is almost as hard as a diamond. The metal is molded from tungsten and carbon powders under heat and pressure. Tools made from this metal can cut other metals many times faster than high- speed steel tools. Tungsten high quality to cutting product in process line ( ex tungsten carbide drill tungsten carbide bands tungsten carbide powder tungsten carbide cobalt tungsten carbide ball ) we made it
		Planning Knives Trip The cutting edge lips cut like knives when fed and rotat into the workpiece. The lips are sharp edges formed grinding the flutes to a conical point.
		Helical Milling Cutters The steep helix produces a shearing action that results in smooth, vibration-free cuts. They are available for arbor mounting, or with an integral shank with or without a pilot. This type of helical cutter is particularly useful for milling elongated slots and for light cuts on soft metal.
		Finger Joint Cutter Tip: With the machine stopped or the bandsaw blad removed, run a finger slowly over the teeth in the cutting direction. If sharp edges are not felt the blade is dull. if Finger have't standard and quality.
		Router Bits with Carbide Tips Router bits can be one end of a high-speed steel tool bit or one edge of a carbide or ceramic cutting tool or insert. Basically, a single point Routerbit is a tool that has only one cutting action proceeding at a time
		Router Tips Router The successful operation of the lathe and the quality of work hat may be achieved depend largely on the angles that form cutting edge materials Most tools to support opertion.
		A machine reamer only has a very slight lead in. Because the reamer and work piece are pre-aligned by the machine there is no risk of it wandering off course. we made ,
		Segment TheSegment bandsawing machine is adapted for filing by use of the band file attachment. A band file is fitted over the drive and idler wheels and in place of the bandsaw blade to cuuting in process line .

Knowledge: Shell mills are used either by themselves

The side and face cutter is designed with cutting teeth on its side as well as its circumference. They are made in varying diameters and widths depending on the application. The teeth on the side allow the cutter to make unbalanced cuts (cutting on one side only) without deflecting the cutter as would happen with a slitting saw or slot cutter (no side teeth).